1.Start with one room at a time.
There may be the temptation, especially when moving into a new home, to decorate all of the rooms at once. This takes far too much energy and can sap your creative juices, leaving the decorating flat and less interesting. It can also make decorating your home an overwhelming task. Go slow. Do one room at a time and then move on to the next one.

2.Assess, review your needs.
With pen and paper in hand, jot down some notes about all of the windows in the room. Measure them and note their size and shape. Rough sketches will help. Are the windows too large? Too small? Odd sizes? Mismatched sizes? Is there too much light in the room? Not enough light? Do you want to block an unattractive view? Do you want to enjoy the beautiful view? Do you need privacy? Daytime privacy? Nighttime privacy? Or both? Do you want to liven up a dreary room? How do other family members feel about these needs? What is your budget for the windows?

3.Look for help, tips and ideas.
Seek inspiration. One thing is for certain, no matter what the challenge or situation that you are facing with your windows, someone else has already dealt with the same situation. There is a way, or many ways, to attractively treat the windows in your room. You can find examples of how others have decorated their windows in magazines, window decorating books, window decorating websites and by talking with friends and relatives.

4.Make a plan.
Using your list of needs, rank the needs in order of importance and then make a plan that addresses your needs in that order. There is a way to treat issue.

5.Address your window coverings in stages.
This is especially if you are uncertain about your preferences or if you are working on a budget. Begin with the shades, blinds or shutters. Once these are selected and installed, move to draperies or curtains, including the traverse or curtain rod. Finally, add the finishing touches such as cornices, decorative tie backs and finishing hardware.

6.Combine and contrast colors.
Using color in your window treatment is an excellent way to put life and energy as well as set the tone and mood of a room. Experiment with mixing colors from opposite ends of the color spectrum.

7.Mix fabrics for texture.
Fabric is composed of either natural or synthetic fibers and how they are woven, knitted or felted together. The type fiber and the weave or knitting will determine the texture of the material or fabric. Mixing fabrics and textures can be an excellent way to create interest and set the tone of your window treatments. For example, you may consider using velvet over organdy or silk over linen. Common fabrics for window treatments include brocade, cambric, canvas, chintz, cotton duck, crewel, damask, gingham, lace, linen, muslin, organdy, satin, silk, taffeta and velvet.

8.Mix patterns.
Mixing patterns can also liven up and set the mood for a room. Here are some tips for mixing patterns.

a. Match the scale, of the pattern to the area where it is going to be used. For example, use larger patterns on the drapes or curtains, medium patterns on valances or cornices and small patterns on accent pieces.

b. Use geometric patterns with one another. For example, you can use stripes with checks, plaids or dots.

c. Common colors in mixed patterns tie the two together. For example, blue stripes mixed with matching blue dots will tie the two patterns together.

9.Make small windows big.
Make big windows smaller. One of your goals should be to make the room harmonious. Mismatched windows or windows of dissimilar size and shape can disrupt this harmony. You can make small windows appear larger by placing a heading such as a valance or cornice on the wall above the window and using curtains or drapes of similar length. Large windows can be treated with a series of blinds or drapes breaking up the expanse. Large cathedral windows can be treated by installing a curtain or traverse rod on the lower part of the window and leaving the upper portion untreated.

10.Let your window coverings evolve.
Like a garden, the interior decoration of your home, including window treatments will be subject to change. Let your windows evolve as the interior of your home changes to reflect changes in your lifestyle or tastes. The first order for your windows is to provide privacy and light control. This will be accomplished with shades, blinds, miniblinds or shutters. Then you can begin creating mood with decorative treatments of color, design and texture. As you gain confidence and experience with decorating, you can change and expand your window treatments.

If you are tired of the same old boring drapery and curtains, now is the time to make a change. Follow these steps. Look for tips and ideas in books, magazines and websites. You are on your way to a complete window make over.

Regardless of the type you purchase, it’s important to follow the proper safety precautions. Always wear safety goggles when operating equipment to protect your eyes. Wear protective clothing, such as long sleeves and long pants. Proper footwear, such as work boots or strong sneakers is important for protecting your feet.

Types of Portable Air Compressors

Portable rotary screw compressors are the most commonly used air compressor. These range from 65 to 1600 cubic feet per minute. The pressure ratings vary from 100 to 350 PSI. The one you will need depends on the tools you will use. Contractors often use 185 CFM. These are strong enough to power two tools at a time. These are good for lighter and heavy duty jobs.

Truck mounted compressors can be mounted in the bed or under the hood. Under hood models are good for space saving. These use the engine of your truck for power, making them low maintenance. The downside of this is that the truck must be running to power the compressor.

Deck mounted compressors are mounted in the bed of the truck. They can be taken out and left at the job site until the job is finished. These have their own engine, so they don’t rely on your vehicle for power. They do need regular maintenance on the engine and will need fuel to power the engine.

Some compressors are electrically powered and others run on gasoline. The air is stored in the holding tank on both types. The tools are attached with a hose. The gauges on the compressor indicate the pressure, which is regulated with a valve.

Major Brands of Air Compressors

Quincy makes an excellent line of air compressor systems. Their rotary screw compressors vary from 10 to 350 horse power. These machines are reliable, durable and quiet. A wide variety is available from smaller tank models to larger, stationery cabinet styles.

Husky air compressors are generally made for home use. The 1.75 gallon tank has 135 PSI power and is good for running tools, such as sprayers, nailing guns and also is useful for insulation. They are convenient and easy to transport with a telescope handle. This model has an oil free pump for easy maintenance.

The four gallon Husky model has 125 PSI power for running small tools and spraying. This model can also be used to inflate tires and other recreational items. This model is great for the homeowner or small woodworking shop.

1. Cooking several meals for the week at one time. It may take a few hours of your time up front but will pay off in the long run when you come home each evening and have a meal ready to eat in a short amount of time. Try cooking a roast and using part of it as a main meal and then using some for sandwiches, beef stroganoff or as part of a stir-fry. Fry several pounds of hamburger and make a casserole, taco meat and chili to freeze for use later in the week.

2. After you return home from the grocery store clean all the fruits and vegetables you can. When it’s time for a meal all you will have to do is cook them or add them to a salad or soup.

3. Get ideas from the cooking shows on T.V. There are great shows that show you how to make a healthy meal in a short time.

4. Develop a revolving recipe file. If you get bogged down by the idea of having to plan 30 meals a month the recipe file is for you. Let family members choose some of their favorites and put the recipes in a monthly file. Flip to day five or fifteen and there is the meal just waiting to be cooked.

5. Enlist the help of the members of your family. As soon as the kids are old enough divide up the cooking responsibilities. Let everyone take turns with specific tasks or the whole meal. Pair these meals with fruit and veggies that have already been washed and cut-up and you are ready for dinner.

6. Share the cooking with friends or neighbors. I’ve known people who cook four or five of the same meal and then trade with four or five other people. This works best when people share the same basic ideas on what they like and don’t like. It’s a great idea though for a very easy week of evening meals.

7. Save coupons for those convenience things at the grocery store. They have entire entrees and dinners either fresh or frozen. Sometimes they are rather pricy but with the coupons they are good to have on hand for an evening when everyone is running in different directions and time is of the essence.

8. It’s O.K. to eat out from time to time. Clip coupons for these occasions and if you have kids keep a look-out for the places that have special prices for children. Some of the fast-food restaurants are trying to offer item choices that are a little more healthy.

9. Many larger cities have businesses that prepare food for the evening meal. They seem expensive at first but are so convenient and available for one person or entire families. There are many menu choices and meals cooked for special diets. When you calculate the groceries you buy and the times you eat out each week, this may work for you.

10. Combine several of the above ideas into a plan that is best for you.

It is possible with a little planning to cook meals that are quick and easy without spending hours in the kitchen every day.

Here are some succulent suggestions from the experts at Red Lobster on easy ways to crack and eat this delectable dish.

Step 1: Where to begin? The claws, with meat that is tender and flavorful, are generally the best place to start. After removing the two front claws, use a nutcracker to crack them open and a lobster fork to remove the meat.

Step 2: The tail meat is considered the sweetest part of the lobster. Turn the lobster on its back, holding the body with one hand and the tail with the other. Gently twist the tail to detach it. Remove the end flippers. Using a fork, you can then pull out the juicy meat.

Step 3: There’s plenty of meat in the body of the lobster. Flip it over and unhinge the back by cracking it apart lengthwise and pull out the tasty meat with a pick. The greenish-gray tomalley in the body cavity is considered a delicacy (the sand sac near the top of the lobster is not edible, though).

Step 4: The last step is enjoying the meat in the legs. The meat here is delicious and can be sucked out like a straw.

Whether you enjoy lobster “as is” or prefer dipping it into melted butter or a savory sauce, this deep-sea delight can be a dining experience like no other. Plus, it’s a low-calorie, low-fat source of protein: 3.5 ounces of lobster meat has only about 96 calories and less than 2 grams of fat, according to the seafood specialists.

Succulent and good for you-how many foods can you say that about?

Begin the installation by nailing fastening strips at each riser-tread corner; wear work gloves. Measure the width of the stairway and subtract the part that will be covered by the carpet runner; divide by 2. This is the number of inches at each side of the stairs that won’t be covered. Measure in this distance from one side of the stairway at the base of each riser and the inside of each tread; mark each of these points with chalk or pencil. Then measure in the same way from the other side of the stairs. Measure each stair across from mark to mark to make sure you’ve measured accurately; the carpet runner will be centered on these marks.

Cut the strips to the width of the runner with a small handsaw. On each stair, nail a strip centered on the riser, teeth pointing down, 3/4 inch above the surface of the tread below it; use a 3/4-inch-thick piece of scrap wood to hold the strip in place as you nail it. Nail another strip centered on the tread, teeth pointing in to the riser above it, 5/8 inch out from the riser. You’ll end up with an open V of fastening strips at the back of each stair, straight or wedge shaped, with one strip near the floor at the bottom of the lowest riser and one at the back of the top tread. Don’t nail a strip onto the top riser.

After nailing the fastening strips, measure and mark the carpet padding. Measure the padding to the width of the carpet runner, less about ¼ inch so that it will be very slightly recessed under the carpet edge at each side. With a heavy scissors, cut a strip of padding to fit over each stair tread, long enough to wrap from the tread fastening strip around the tread and down about 2 or 3 inches onto the tread below it. Make a paper pattern to cut the padding for each wedge-shaped step; the padding must cover the tread, round the edge, and wrap over onto the riser below it.

Install the padding with staples. Center a trimmed piece of padding, waffle-patterned side up, on each tread, with its end butted against the fastening strip at the back of the tread. Staple the end of the padding to the tread, using a staple gun to set staples diagonally every 2 inches along the fastening strip. Stretch the other end of the padding out over the tread and down onto the riser below it; holding it evenly stretched, staple it into place. Use the paper pattern to cut padding for wedge-shaped stairs, and fasten the padding the same way.

Finally, unroll the carpet runner and drape it over the stairway, with the nap or pile leaning out and down from top to bottom. Winding stairways are treated as straight flights interrupted by wedge-shaped steps; lay the carpeting out over the bottom straight flight and up to the first wedge step. Pull the carpet runner into place from the bottom up, making sure that the nap or pile lies in the right direction (down) and that the carpet is positioned straight over the fastening strips and between the chalked centering marks on the stairs. Even a small skew at the bottom can magnify noticeably by the top of the stairway, so adjust the runner carefully.

Start fastening the carpeting at the bottom of the first riser. Position the end of the runner directly over the bottom fastening strip so that about 3/4 inch of carpet is turned up along the floor. Trim any uneven edges from the end of the runner with a sharp utility knife.

Push the point of an awl into the carpet at one side and use the awl to push the end of the carpet onto the fastening strip, leaving about 3/8 inch of loose carpet below the newly fastened edge. Smooth the carpet firmly into place along the strip, working across with the awl until the entire end has been fastened.

–

See also great posts:

Vegetable culture
Get out more dirt
Home landscaping

Homemade Wind Turbines are the best alternative wind-powered generated turbine to the commercial manufactured model. Commercial wind-powered turbines are not that expensive; however, it is still way better if you can save your money by making your homemade wind-powered turbine and use it at home. It will take some time if you are going to build home-made wind-powered turbine because it is a little bit complicated and it needs the ability of a person to build such device.

For you to build your home-made wind turbines there are basic components of a wind turbine that you need to purchase and start building it at home. Among the basic components that you need to purchase are the wind turbine blades, motor, turbine hub, body assembly and the tower. Once you have built your homemade wind turbine, you need to paint it frequently because its paint will help protect the device from the direct light.

You can also choose to purchase motor and tower online, if you wanted it to be fast. Be careful in choosing the motor because there are certain motors that will wok much better than others, thus, you need to purchase the right one so that your homemade wind-powered turbine will really work.

Start learning how to build these home-made wind generators, it will just require you simple tools and skills in building such wind turbine at your respective homes. Once you have successfully made it, you can start conserving your energy consumption and get a lower electricity bill with the help of your home-made wind turbine.

To save energy at home is to indirectly save money and heavily reduce home expenditures. Download Your Free Report at: Go Save Power to learn more about Alternative Energy and saving energy at home. To learn more about saving energy and acquiring energy efficient homes, do visit my website: http://www.gosavepower.com/

Look at your budget and figure out how much money you have to spend on this project. You can go with the option of choosing a shed plan that comes with all the materials you need or you can just buy the plans. Then you can purchase the material when you need it so you don’t have to spend a lot of money at one time. If money is an issue, you can sort through the various plans to find one that is not expensive and will give you the extra space you need.

The foundation of the shed is an important factor. It does need to be solid and there are many different types of foundations you can choose from. These include:
- Patio stones. This is the simplest method if you are planning on having a wood floor in your shed. They are great for a shed that is not too large and for areas where the ground is relatively level.
- Cinder Blocks. This is another way of providing a foundation, but are not very good for areas where the ground is soft, they area heavy and provide support, but will sink into soft ground, thereby making your shed to look uneven.
- Super Spikes. If you want to build your shed in an area where one part of the ground needs to be raised, super spikes will save you a lot of work. However, they should not be used in areas that receive frost.
- Concrete Footings. These are the perfect solution in areas where the ground is uneven or where you need a building permit to build a shed on your property. They should be at least 10 inches in diameter and drilled well below the frost line.
- Concrete Pads. These provide a base from which you can mount your shed walls. If you intend to store heavy loads in the shed, this is the choice you should make.

Always make sure the shed plan you choose has a picture of the finished product. This will help you in your decision because you want something that will look great and match the exterior of your home. You may even be able to find a set of plans that matches your home perfectly.

Now take a look at the level of difficulty of the plans. If you have never built anything like this, you should opt for a simple plan or one that has all the instructions spelled out for you. Check the plans to see how much work will be involved and make a decision about whether or not you think you will be able to do it on your own.

If the toaster doesn’t heat, make sure the power cord running into the toaster is properly connected to the terminals inside the toaster housing. Also check the heating element contact points; these points must touch for the elements to heat. If the points are out of alignment, push them back into position with needle-nosed pliers; or, if the bimetallic strip is exposed, turn the adjustment screw near the strip. To test alignment, push the control lever down, the contact points should touch. Also check the solenoid contacts; clean them with a fine emery board or an artists’ brush.

The no-heat problem can also be caused by a bad heating element. Unscrew the small metal strip holding the elements in place. If lock tabs are used to hold the individual elements in position, bend these tabs straight with needle-nosed pliers, and then slide the element off the tabs. Replace the element with a new one made for the toaster.

If the toast doesn’t pop up out of the toaster, examine the return spring close to the lever. If the spring has slipped out of its holes on the top or bottom, reconnect it. If the spring is badly stretched or broken, replace it with a new spring; fit the spring into the top and bottom holes where the old one was.

Pop-up problems can also be caused by dirty or out-of-alignment solenoid contacts. Clean the contacts where they touch with a fine emery board; if they’ve moved out of position, reposition them with needle-nosed pliers. If this doesn’t work, and you can unscrew or unplug the solenoid, replace it with a new solenoid made for the toaster.

Make sure that the trip lever and / or latch is operating smoothly. If it sticks, lubricate the lever or latch with silicone lubricant or heat resistant oil; fill any oil holes with the lubricant or apply it at all joints.

Radiant barriers are basically insulation devices used to maintain temperature of the surroundings. They are mainly composed of reflective aluminum sheets placed on substrate material. The substrates are made up of brown paper, craft paper, plastic films, cardboard, plywood sheathing or air infiltration barrier material.

There are two major types of radiant barriers i.e. Spray on and Sheet Barriers. Installation of spray on barriers is very simple. It is just sprayed on the underside of roof. It is made up of paint and metal flecking mixture. This mixture has enough reflective property to reflect the heat. Spray on barrier is durable. The sheet radiant barrier comes in the form of large roles. It can be installed by rolling out on the whole attic. You can roll it up on entire top insulation, hang it from rafter supports, nail it to bottom of the roof or roll it out underneath shingles.

All types of radiant barriers have same basic working principle. Heat exchange occurs due to thermal radiation. Radiant barriers minimize this heat exchange between roof deck and the attic floor. They have a high ‘reflectivity value’ (usually 0.9 or 90%) and low ‘emissivity value’ (usually 0.1 or less).

The reflectivity value determines the amount of radiations reflected by the surface. It has a value from 0 to1 or 0% to 100%. The emissivity value determines the amount of radiations produced by the material. It has a value from 0 to 1. A surface with high emissivity value will produce more heat radiations.

During summer, roof absorbs lots of solar energy. Radiations are produced by roof sheathing underside and roof framing areas. Due to conduction process, heat travels from top of the roof to lower cooler areas and air pipes. Radiant barrier reflects these radiations back to the roof. This keeps the insulation layer cooler. And less heat moves through insulation into the room. Roof mounted radiant barriers reduce the amount of radiation that strikes the insulation. This lowers the temperature of insulation layer. As a result, less heat flows through the insulation.

During winters, solar energy is lost from the attic. Radiant barriers reduce this heat loss. They minimize the amount of energy radiated from the top surface of the insulation. However, solar heating of the roof may also result in loss of some beneficial heat gains. More research is currently underway to determine the affectivity of radiant barriers in winter season.

For more information on this article, please visit weatherization Austin TX.

Say you want to use a Victorian theme for your recent home decorating project (for one room or whole house), it is important to remember that theme of Victorian decorating is enought elaborate and seems like to be very feminine. When picking home decorating fabric for a Victorian theme, you should strive to pick the one which resemble those used within the Victorian period. For bedding and curtains, home decorating fabric must be made from heavy material. The Choice like velvet and brocade are quite popular for Victorian theme in home decorating fabric. To accessorize the fabric, ribbons and bows, face and beads can be used as trim.

Choosing a modern theme would suggest the use home decorating fabric which is bold and vibrant. Modern home decorating is usually based on an open concept with big spacious rooms. The large space is intended to draw your attention to the various details in the room which would include home decorating fabric. These bold and vibrant fabrics, used in curtains, slip covers or throw pillows, will certainly stand out in a modern, spacious room with light to cool colors used on the walls. In this situation, the home decorating fabric would definitely be noticed and appreciated.

Oriental home decorating seems to be popular nowadays. Its unique design with accessories such as Chinese dragons, elephants, fans and screens, make a room interesting and a great topic of conversation. Home decorating fabric or an oriental theme usually includes coral, red, ivory and jade colors. The most popular fabric used in oriental home decorating is silk. Using silk in colors like coral or red would definitely stand out and compliment the rich dark wood furniture recommended for oriental decorating.

Home decorating fabric is sort of like icing on the cake. You add great pieces of furniture to a space with walls painted in beautiful colors. Then to accent the furniture or a window, you choose home decorating fabric. A window, because it provides access to the outside, is always a focal point in any room. Using fabrics made from materials suited to the theme, your window treatments would definitely draw attention to the window.

If you are wondering where to find home decorating fabric, there are several places to shop. You may want to buy slip covers, cushions or curtains that are already made. Department stores have a great selection. There are also stores that specialize in home décor. These would certainly provide a selection of home decorating fabric. If you are a crafty individual, you may choose to make your own decorative items for your home. Again, department stores usually stock a big variety of fabric. There are fabric stores in most areas as well. If undecided regarding what you should use or would like to use in home decorating fabric, the Internet will surely be able to provide links taking you to all the right places.